Druid One

There is a new contender in town: the Dutch drone racing frame DRUID One!

The DRUID One is the first frame that I finalized after several prototyping rounds with the Dutch drone community.

You can now order a DRUID One. There are several add-ons available as well.

Get yourself a Druid One

Fresh batch arrived!

This drone racing frame is designed for performance, durability and style.

All the necessary electronics for a state of the art racing drone will fit and are well protected by the TPU Pod.

I’ve chosen Armattan Productions to manufacture all the carbon fiber parts. Their CF and excellent milling service make the racing frame and spare parts of excellent quality and affordable too.

SPECS AND FEATURES

  • stretched X frame for 5” props (220mm – 5,2″ props do fit)
  • 5mm arms (10mm wide)
  • 16×16 motor mount (4 bolts)
  • locking arms to the center of the quad
  • 2mm base plate bottom with holes for sunken bolts for flat LiPo surface
  • 2mm base plate top with chamfered edges
  • strain relief options for power wires
  • 30,5×30,5 stack mount (m3)
  • 20×20 stack mount (m3)
  • 3D printed TPU Pod for micro FPV cam
  • Weight:  86 grams (incl. 4x 25mm bolts to mount the stack)
  • Quality carbon fiber parts by Armattan Productions
  • Tight build with limited space in front of stack (units with extra tabs might not fit).
  • Clean build with 4-in-1 ESC + FC will fit with small VTX and RX. (TrampHV and XM+ fit nicely)

Included hardware

  • 8 x press-in nuts
  • 2 x 8mm M3 steel button head bolt (rear top)
  • 4 x 16mm M3 steel countersunk bolt (front and rear bottom)
  • 4 x 25mm M3 steel countersunk bolt (option 1 – double layer stack)
  • 4 x 12mm M3 steel countersunk bolt (option 2 – single layer stack)
  • 4 x 10mm M3 steel countersunk bolt (option 3 – if 20×20 stack is in use)
  • 2 x m3 hex lock nut (front of pod)
  • 2 x m3 25mm aluminum standoffs

Add-ons (not included in the kit)

  • 3D printed Low ESR cap mount between standoffs
  • 3D printed arm protectors

Recommended Setup

Check out this drone racing shopping list with all the parts I use.

Druid One - Dutch Drone Racing Frame

Order Now

A complete frame includes 4x arm, 1x pod, 1x top plate, 1x bottom plate, 1x mounting hardware. You may select some spare parts and add-ons.


Arm
€ 5,50
Pod
€ 14,50
Bottom plate
€ 6,50
Top plate (incl. press-in nuts)
€ 7,50
Mounting hardware
€ 4,50
Low ESR Cap mount (Dual Exhaust Style for 10mm caps)
€ 3,50
Arm protectors (4 pieces)
€ 5,50



Verzendkosten€ 6,50
Totaal








PLEASE LEAVE YOUR E-MAIL IF YOU WANT TO ORDER OUTSIDE THE NETHERLANDS.




©2019 - Kort door de Bocht

    

Login met je gegevens

Je gegevens vergeten?